EnluGen
A lime-based stucco for premium decorative work, hand-applied in thin coats and sanded matte or burnished to a polish. Highly breathable, with high flexibility and adhesion; ready to use, no mixing required.
- Sanded matte or burnished to a polish
- Hand-applied in thin coats for premium decorative work
- Ready to use, no mixing required
- Highly breathable, flexible and adhesive
Where it goes: Stucco · Existing paint · Concrete · Prefabricated panels · Tiles (prepared)
PREMIUM LIME-BASED DECORATIVE STUCCO
Create sophisticated mineral surfaces with the depth, movement and character of hand-applied lime. EnluGen™ is a premium, ready-to-use decorative stucco for interior and exterior walls, creating finishes that range from soft mineral matte to a refined, Venetian-inspired polish. Every surface is finished by hand, creating natural movement and one-of-a-kind architectural character.
At a glance
- TRACE VOC
- INTERIOR + EXTERIOR
- 73–92 SQ. FT./GAL PER COAT
- TROWEL
- HAND-APPLIED
Why it works
- Sanded matte or burnished to a polish
- Hand-applied in thin coats for premium decorative work
- Ready to use, no mixing required
- Highly breathable, flexible and adhesive
Where to use it
Stucco · Existing paint · Concrete · Prefabricated panels · Tiles (prepared)
Technical details
| Coverage | 73–92 sq ft/gal per coat (Three coats typical (24–31 sq ft/gal finished system)) |
|---|---|
| Coats | Three coats typical |
| Colors | White or Harmony chart |
| VOC | Trace VOC (< 1 g/L (ISO 11890-2)) |
| Polish after | 30–40 min by hand (90 min electric) |
| Apply at | 41–90 °F (air & surface) |
How to apply it
- Prepare: Flat, sound and dust-free — the plaster mirrors the wall. Prime where needed. (24 h if primed)
- 1st coat: Trowel-on load coat, about 0.012 in. (1 h)
- 2nd & 3rd: Thin and compressed, while the previous coat is still fresh. (30–40 min)
- Finish: Burnish to a polish by trowel or polisher, or sand lightly for matte.
- Protect & cure: Wet areas only: PU Water-Repellent after 7 days. Lime carbonates over 30 days. (30 days)
Surface preparation
| Surface | Primer |
|---|---|
| Lime or cement stucco, fine-floated | Not needed |
| Concrete, precast or smooth mineral panel | Primer Contac |
| Gypsum plaster · drywall (Level 4–5) | Primer Contac |
| Well-bonded matte paint | Primer Contac |
| Highly or unevenly absorbent substrate | MinerGen |
| Salt efflorescence | Neutralysalt Primer |
| Tile, glass, laminate, epoxy or PU paint | All Terrain 4x4 + Primer Contac |
| Film-forming or poorly bonded paint | Remove it first |
Questions
How much will I need?
Coverage: 73–92 sq ft/gal per coat. Three coats typical (24–31 sq ft/gal finished system). Use the project calculator on this page — it rounds up to full containers.
Do I need anything else?
Only the primer your surface needs: pick your surface under How it works and we'll show the one primer it needs, if any. TerraGen™ PU Water-Repellent: recommended in wet areas — wet areas only; not needed elsewhere. Not sure? Tell us what's on your wall and we'll help you choose.
Where can I use it?
Interior and exterior. Stucco, Existing paint, Concrete, Prefabricated panels, Tiles (prepared).
How long does an unopened pail keep?
18 months in the original, sealed container.