Skip to content

See the finish in your own light · Inquire for a Sample Kit

Primer Contac

Origen Paints Primer Contac is a primer formulated with organic Vinyl Acetate Ethylene (VAE) and CaCO₃™ Technology (Graphene Technology), designed to act as a bonding bridge on smooth or low-porosity surfaces.

It provides effective mechanical anchoring for skim-coat mortars, adhesives, and subsequent coatings, improving adhesion and enhancing the durability of the applied system.

BIO-BASED ADHESION BRIDGE FOR MORTARS

An adhesion bridge that gives plaster mortars and adhesives a strong mechanical key on smooth or non-porous surfaces. Bio-based (VAE), with excellent flexibility (non-cracking); applied straight from the pail in a single coat by brush or roller.

At a glance

  • TRACE VOC
  • INTERIOR + EXTERIOR
  • 325–365 SQ. FT./GAL PER COAT
  • BRUSH · ROLL

Why it works

  • A mechanical key for mortars on smooth surfaces
  • Bio-based (VAE) and non-cracking
  • One coat, straight from the pail
  • Dry in 24 h, then mortar

Where to use it

Smooth surfaces · Non-porous surfaces · Before plaster mortars · Before adhesives

Technical details

Coverage325–365 sq ft/gal (per coat)
FinishYellow, textured
VOCTrace VOC (< 1 g/L (ISO 11890-2))
Coats · Preparation1 coat (ready to use)
Dry before mortar24 h (at 77 °F · 60% RH)
Apply at41–104 °F (air & surface)

How to apply it

  1. Prepare: Clean, dry and sound; brush off loose material and salts.
  2. Apply: Brush or roller. (24 h)
  3. Topcoat: Continue with the finish your wall needs.

Questions

How much will I need?

Coverage: 325–365 sq ft/gal. Per coat. Use the project calculator on this page — it rounds up to full containers.

Do I need anything else?

TerraGen™ Gratti: finish coat — then the mortar: Gratti. TerraGen™ Marmolino: finish coat — or Marmolino. EnluGen™: finish coat — or EnluGen stucco. Not sure? Tell us what's on your wall and we'll help you choose.

Where can I use it?

Interior and exterior. Smooth surfaces, Non-porous surfaces, Before plaster mortars, Before adhesives.

What's the recoat time?

24 h (at 77 °F and 60% RH; cold or humid conditions extend it).

How long does an unopened pail keep?

24 months in the original, sealed container.