All Terrain 4x4 Primer
Origen Paints All Terrain 4x4 is a water-based multi-surface primer formulated with CaCO₃™ Technology (Graphene Technology), designed to ensure paint adhesion on all types of smooth and non-porous surfaces. It acts as an effective bonding bridge without compromising the breathability of the substrate.
It provides an anti-rust effect on metal surfaces, helping to prevent corrosion and oxidation, while also acting as a sealer on wood, MDF boards, and stained surfaces.
BIO-BASED MULTI-SURFACE BONDING PRIMER
One primer for difficult surfaces: it secures paint adhesion on glass, ceramics, tile and other smooth, non-porous substrates, protects metals against corrosion and rust, and seals wood, MDF and stains. Fast drying and ready to use; it does not alter substrate breathability.
At a glance
- ULTRA-LOW VOC
- INTERIOR + EXTERIOR
- 400–480 SQ. FT./GAL PER COAT
- BRUSH · ROLL · SPRAY
Why it works
- One primer for glass, tile, metal, wood and MDF
- Protects metals against corrosion and rust
- Seals wood, MDF and stains
- Fast drying, ready to use, keeps the substrate breathable
Where to use it
Glass · Ceramics & tile · Rust-free metal · Wood & MDF · Non-porous surfaces
Technical details
| Coverage | 400–480 sq ft/gal (per coat) |
|---|---|
| Finish | White |
| VOC | Ultra-Low VOC (< 5 g/L (ISO 11890-2)) |
| Recoat / Dry | 24 h (at 77 °F · 60% RH) |
| Application | Spray, brush or roller |
| Preparation | Ready to use (no dilution) |
How to apply it
- Prepare: Clean, dry and grease-free. Lightly sand any gloss. (dry)
- Prime: One coat of All Terrain 4x4, undiluted, by brush, roller or sprayer. (24 h)
- 1st topcoat: Limewash, GrafGen or EnluGen — per its own guide. (per topcoat)
- 2nd topcoat: Same technique as the first. (per topcoat)
- Cure: No washing or scrubbing until the topcoat has cured.
Surface preparation
| Surface | Primer |
|---|---|
| Glazed tile, ceramic or glass | All Terrain 4x4 |
| Epoxy or polyurethane paint | All Terrain 4x4 |
| Wood and MDF | All Terrain 4x4 |
| Sound metal: steel, stainless, aluminum | All Terrain 4x4 |
| Stains on interior walls | All Terrain 4x4 |
| Smooth substrate under TerraGen plasters | Primer Contac |
Questions
How much will I need?
Coverage: 400–480 sq ft/gal. Per coat. Use the project calculator on this page — it rounds up to full containers.
Do I need anything else?
Only the primer your surface needs: pick your surface under How it works and we'll show the one primer it needs, if any. GrafGen™ Interior/Exterior: finish coat — then 2 coats of GrafGen. OxiGen™ Limewash White: finish coat — or Limewash. Not sure? Tell us what's on your wall and we'll help you choose.
Where can I use it?
Interior and exterior. Glass, Ceramics & tile, Rust-free metal, Wood & MDF, Non-porous surfaces.
What's the recoat time?
24 h (at 77 °F and 60% RH; cold or humid conditions extend it).
How long does an unopened pail keep?
24 months in the original, sealed container.