OxiGen Therm
A lime-based exterior mineral paint made with high-quality artisanal lime, CaCO₃™ Technology (Graphene Technology) and nano glass, with solar reflectance above 80%. Highly breathable, water-repellent and non-film-forming, with a matte mineral finish in selected Harmony shades — for façades and other mineral substrates, in new construction and repaints.
- Solar reflectance above 80% for cooler façades
- Real lime, CaCO₃™ Technology (Graphene Technology) and nano glass
- Water-repellent yet highly breathable
- Matte mineral finish in selected Harmony shades
Where it goes: Exterior Walls & Façades · Exterior render · Mineral substrates · New construction · Repaints
HIGH-REFLECTANCE LIME PAINT FOR EXTERIOR WALLS
A lime-based exterior mineral paint made with high-quality artisanal lime, CaCO₃™ Technology (Graphene Technology) and nano glass, with solar reflectance above 80%. Highly breathable, water-repellent and non-film-forming, with a matte mineral finish in selected Harmony shades — for exterior walls and other mineral substrates, in new construction and repaints.
At a glance
- TRACE VOC
- EXTERIOR
- 0.18–0.25 LB/SQ. FT.
- BRUSH · ROLL · SPRAY
- SOLAR REFLECTANCE > 80%
Why it works
- Solar reflectance above 80% for cooler exterior walls
- Real lime, CaCO₃™ Technology (Graphene Technology) and nano glass
- Water-repellent yet highly breathable
- Matte mineral finish in selected Harmony shades
Where to use it
Exterior Walls + Masonry · Exterior stucco · Mineral substrates · New construction · Repaints
Technical details
| Coverage | 0.18–0.25 lb/sq ft (0.9–1.2 kg/m²) |
|---|---|
| Solar reflectance | > 80% |
| Finish · Colors | Matte · Harmony selection |
| VOC | Trace VOC (< 1 g/L (ISO 11890-2)) |
| Recoat / Dry / Full cure | 2–4 h / 24 h / 30 days |
| Application · Apply at | Brush, roller or spray (41–104 °F) |
How to apply it
- Prepare: Clean, dry and sound; new mineral substrates cured 28 days.
- 1st coat: By brush, roller or spray. (2–4 h)
- 2nd coat: Same technique. (24 h dry)
- Cure: Protect from rain and washing while it cures.
Questions
How much will I need?
Coverage: 0.18–0.25 lb/sq ft. 0.9–1.2 kg/m². Use the project calculator on this page — it rounds up to full containers.
Do I need anything else?
MinerGen: required — only if the substrate is weak or crumbling. Neutralysalt Primer: required — only if the wall shows salts. Not sure? Tell us what's on your wall and we'll help you choose.
Where can I use it?
Exterior. Exterior Walls + Masonry, Exterior stucco, Mineral substrates, New construction, Repaints.
What's the recoat time?
2–4 h / 24 h / 30 days (at 77 °F and 60% RH; cold or humid conditions extend it).
How long does an unopened pail keep?
18 months in the original, sealed container.